Description

MidNite Solar MNEDC125RT Remote Trip Circuit Breaker 125A

MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.

Breaker Torque Value: 30 In-Lbs (3.4NM)

MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. This breaker has the Remote Trip feature that allows it to work with a Rapid Shutdown
System.

All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.
The remote trip voltage to be applied should be between 24 and 30 volts DC.
The voltage applied must be a pulse lasting no more than 0.1 second or damage may result.
There is no warranty on breakers with a burnt out trip coil.
Features

Breaker Torque Value: 30 In-Lbs (3.4NM)
Environmental Rating – Type 1 (Indoor)
AIC 10,000 at 125VDC
Warranty – 5 yrs.
Listed for US & Canada
Specifications

FL. AMP: 125
Max Volts: 150
Hertz: DC
Delay: 14
Trip Amps: 156
Circuit: K0
V.Coil: 24(19TRIP)VDC
Width is 1 inch (25.4mm) – 1/4 inch studs
Includes two 6-32 x 5/16″ pan head phillips mounting screws

All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.

NON POLARIZED
Width 1 inche (25.4mm) – 1/4 inch studs
Environmental Rating – Type 1 (Indoor)
Warranty – 5 yrs.
Listed for US & Canada
Includes two 6-32 x 5/16” Pan Head Phillips mounting screws

Circuit breakers are an important component of the solar system. Between Direct Current and Alternating Current, it serves as a barrier. A barrier between the panels and the alternating current is necessary for installation and routine maintenance. Electric protection requires the use of circuit breakers.

Manufacturer: MidNite Solar